Home > Products > Audio > 2 Channel Audio > AMP1A-106

My Quote:  Products  0   |  Qty  0
ClickTo View Image
2 Channel, Analog, Audio Monitor, 1RU.
Product Description

The AMP1A Series monitors provide self-powered, full fidelity stereo audio monitoring of 2 analog channels (1 stereo channel) in the smallest rack space possible. These units contain four high performance transducers driven by three power amplifiers: one amplifier/driver combination handles midrange and high frequency information in stereo, while the second handles summed low frequency information below the 500 Hz crossover point.

The unique design provides optimally focused sound for operators in an ultra near field (1 to 3 ft.) working environment and offers performance comparable to that of many separate monitor pairs, yet does so without the installation hassles, awkward speaker placements and "added-on" look. This provides for a higher SPL for the operator while reducing overall ambient sound and adjacent bay crosstalk.

Extended HF response reveals potential problems with audio whine or hiss. Electronic rather than acoustic cancellation of bass frequencies provides positive audible detection of out-of-phase (reversed polarity) audio feeds. A headphone jack is provided on the front panel; usage automatically mutes the speakers.

List Price: $1,625
Product Information:


Things To Do:
Product Downloads:
No Downloads Available
Wohler Part Number:8100-0060
Signal Inputs Accepted: 
Monitoring Outputs Available:   
Signal Inputs:2 Balanced Analog Inputs on XLR (left and right)
Signal Outputs:2 Balanced Analog Outputs from Selected Source on XLR
Other Features (1):Alternate scales, color mappings and features such as phase correlation or sum & difference may be specified at the time of order
Aural Sound Outputs:Wohler Speaker System;Headphone, Mutes Speakers
Acoustic Distortion:8% or less at worst case frequencies above 180 Hz including cabinet resonance, typically < 2%
Electrical Distortion:<0.15% at any level below limit threshold
Frequency Response (1/6 octave):80 Hz - 16 kHz (+ or -7 dB); (-10 dB @ 50 Hz, 22 kHz)
Peak Acoustic Output @ 2 feet:98 dB SPL
Hum and Noise:Better than -68 dB below full output
Power Output:RMS Each Side: 10W Transient/5W Continuous; RMS Bass: 20W Transient/10W Continuous
Level Meters:2 x 106 Segments (Horizontal)
Level Meter Threshold:0, +4, +6, +8 dBv(='0'), DIP selectable; Factory setting is +4 d
Level Meter Scale:72 dB (+16 to -56 dB Factory default for Extended VU)
Level Meter Dynamics:Simultaneous VU & PPM
Level Meter Resolution:0.5 dB
# of Video Displays:0
Rack Height:1RU
Weight:14.0 lbs (6.4 kg)
Shipping Weight:14.0 lbs (6.4 kg)
Dimensions:1.75x19x12" (44.5x483x298 mm)
Power Consumption:35W
Supplied Accessories:Power cord
Rear Panel
+ Click Image For Close Up
Block Diagram
+ Click Image For Close Up