Home > Products > Audio > 4 Channel Audio > VAMP-24

My Quote:  Products  0   |  Qty  0
ClickTo View Image
Dual input 4" looped CVBS video monitor with 4 channels of analog audio inputs for each CVBS input. Meter all 4 channels and assign one each to the left and right monitor busses.
Product Description

The VAMP-24 is a color video/audio monitor featuring a 4" color back-lit LCD and quality stereo speakers in a 2U rack-size.

The unit features 4" color back-lit LCD with controls for brightness/chroma/tint (NTSC only)/contrast, two pairs of 53-segment high-resolution level meters, and a 2-position source select switch.

The video section automatically detects and displays NTSC or PAL signals, which is indicated by a front panel LED.

Any one or two of the four audio channels may be selected independently and sent to the left and/or right internal speakers or headphone output for audio monitoring.

The rear panel features two analog (CVBS) video inputs and loop-through outputs on BNC connectors, eight (two banks of four) analog audio inputs on Phoenix connectors, and two analog audio outputs of the selected audio source on XLR connectors.

External speakers may be connected via terminal posts on the rear panel without the need of an external amplifier.

A phase indication LED is also provided for each of two metered channel pairs. Power is indicated by a front panel LED.

List Price: Consult your local dealer.
End of Life, Not available for purchase
Product Information:


Things To Do:
Product Downloads:
Wohler Part Number:8003-0020
Signal Inputs Accepted: 
Monitoring Outputs Available:    
Signal Inputs:2 CVBS Inputs on BNC; 8 Balanced Analog Inputs on Phoenix
Signal Outputs:2 Balanced Audio Outputs from Selected Source on XLR; 2 Outputs on Terminal Posts for External Speakers
Aural Sound Outputs:External Speaker Connections;Wohler Speaker System;Headphone, Mutes Speakers
Acoustic Distortion:1.5% or less at frequencies above 200 Hz; 6% or less worst case
Electrical Distortion:Less than 0.1% at any level below limit threshold
Frequency Response (1/6 octave):170 Hz - 16 kHz (+ or - 1dB); (-10 dB @ 140 Hz, 20 kHz)
Peak Acoustic Output @ 2 feet:100 dB SPL
Hum and Noise:> 70 dB below full output
Power Output:RMS Each Side: 20W Transient/11W Continuous
Level Meters:4 x 53 Segment (Vertical)
Level Meter Scale:+16 to -50 dB
Level Meter Dynamics:Simultaneous VU & PPM
Level Meter Resolution:1 dB
# of Video Displays:1
Display Size:4.0 in Diagonal
Display Characteristics:High resolution TFT LCD, Transmissive
Active Viewing Area:3.2"H x 2.4"W (82 mm x 62 mm)
Native Aspect Ratio:4:3
Resolution:480 x 234
Viewing Angle:Top=10, Bottom=30, Left/Right=45
Pixel Pitch:0.171mm W x 0.264MM H
Pixel Response:15 ms rising; 20 ms falling (typical)
Luminance:250 cd/m^2
Contrast:150 to 1
Display Modes:NTSC/PAL auto-sensing
Lamp LIfe:10k hrs avg
Color Depth:262k
Rack Height:2RU
Weight:17.0 lbs (7.7kg)
Dimensions:3.5x19x12" (89x483x298mm)
Power Consumption:60W
Rear Panel
+ Click Image For Close Up
Block Diagram
+ Click Image For Close Up