AMP1A-LP10S (End of Life)

Order Number 8100-0130

End of life.  Replaced by AMP1-2SDA+. 2 Channel, Analog Audio Monitor. 1RU.

Out of stock

****** This product has been replaced by the AMP1-2SDA+. ******

The AMP1A Series monitors provide self-powered, full fidelity stereo audio monitoring of 2 analog channels (1 stereo channel) in the smallest rack space possible. These units contain four high performance transducers driven by three power amplifiers: one amplifier/driver combination handles midrange and high frequency information in stereo, while the second handles summed low frequency information below the 500 Hz crossover point.

The unique design provides optimally focused sound for operators in an ultra near field (1 to 3 ft.) working environment and offers performance comparable to that of many separate monitor pairs, yet does so without the installation hassles, awkward speaker placements and “added-on” look. This provides for a higher SPL for the operator while reducing overall ambient sound and adjacent bay crosstalk.

Extended HF response reveals potential problems with audio whine or hiss. Electronic rather than acoustic cancellation of bass frequencies provides positive audible detection of out-of-phase (reversed polarity) audio feeds. A headphone jack is provided on the front panel; usage automatically mutes the speakers.

Analog Input20 Balanced Analog Inputs on Phoenix
Analog Output2 on XLR
Analog Input Impedance> 40 kOhms balanced
Frequency Response80 Hz - 16 kHz (+/-7 dB); (-10 dB @ 50 Hz, 22 kHz)
Hum and NoiseBetter than -68 dB below full output
Meter DynamicsVU or PPM: DIP selectable; Factory setting is VU
Meter ScaleVU or PPM: DIP selectable; Factory setting is VU
Peak Acoustic Output @ 2 feet98 dB SPL @ 2 ft
Power OutputRMS Each Side: 5W Continuous/10W Peak;RMS Bass: 10W Continuous/20W Peak
Level Meters2 x 10 Segments (Vertical)
Audio Channels (max)2
PhaseYes
Front Panel ControlsBalance; Volume; Channel Pair Source Select
Headphone JackYes
USB PortNo
Rack Height1RU
Dimension Width19.0" (483mm)
Dimension Height1.75" (45mm)
Dimension Depth12.0" (305mm)
SpeakersYes
Net Weight14.0 lbs (6.4 kg)
Shipping Weight14.0 lbs (6.4 kg)
Power Consumption35 Watts
Power SupplyInternal IEC Connector, Universal Input, 100-240VAC, 50/60Hz, CE & UL approved.

Looking for software updates? Click here.

Reporting an issue? Click here.

Features

Signal Input20 Balanced Analog Inputs on Phoenix x Analog Input
Signal Output2 on XLR x Analog Output
Audio Specifications
Analog Input Impedance> 40 kOhms balanced
Frequency Response80 Hz - 16 kHz (+/-7 dB); (-10 dB @ 50 Hz, 22 kHz)
Hum and NoiseBetter than -68 dB below full output
Meter DynamicsVU or PPM: DIP selectable; Factory setting is VU
Meter ScaleVU or PPM: DIP selectable; Factory setting is VU
Peak Acoustic Output @ 2 feet98 dB SPL @ 2 ft
Power OutputRMS Each Side: 5W Continuous/10W Peak;RMS Bass: 10W Continuous/20W Peak
Video Specifications
Features
Level Meters2 x 10 Segments (Vertical)
Audio Channels (max)2
PhaseYes
Interfacing
Front Panel ControlsBalance; Volume; Channel Pair Source Select
Headphone JackYes
USB PortNo
Physical
Dimension Depth12.0" (305mm)
Rack Height1RU
Dimension Height1.75" (45mm)
Dimension Width19.0" (483mm)
Net Weight14.0 lbs (6.4 kg)
Power Consumption35 Watts
Power SupplyInternal IEC Connector, Universal Input, 100-240VAC, 50/60Hz, CE & UL approved.
Shipping Weight14.0 lbs (6.4 kg)
SpeakersYes
Other
Processing